1 Complete Model & Code Explanation

Model: 7012 CDGATP/P4B

Code Definition

7012: Light series precision angular contact ball bearing basic dimension

CD: 15° contact angle, small contact angle design for ultra-high limiting speed

GA: Premium Single Sorting, each bearing individually inspected for face height and clearance, ready for flexible on-site matching

TP: High Temperature Stabilizing Heat Treatment for improved dimensional stability under heat

P4B: P4B ultra-precision grade (higher precision standard than standard P4A)

Note: CD(15° high speed)＜CE(18° balanced)＜ACE(25° heavy axial load); GA = single selected unit for field assembly; DBB = factory pre-matched set; TP = high temperature stabilization treatment; HC means hybrid ceramic insulated type, no HC stands for all steel bearing; P4B precision superior to P4A

Key Dimensions

Bore d: 60 mm

Outer diameter D: 95 mm

Width B: 18 mm

Contact angle: 15°

Structure: Single row open bearing, supplied as single GA selected unit

Rolling element: High-carbon chromium steel ball

Ring material: High-carbon chromium bearing steel with TP high-temperature stabilizing heat treatment

Supply form: Single GA selected bearing, customers can assemble DB/DF/DT arrangement on site according to demands

Pre-filled lubricant: None

Coating: None

Note: Contact SKF for official load ratings and limiting speed data.

Full Product Attributes

Contact form: two-point contact

Number of rows: single row single bearing

Matching mode: Individually GA sorted unit, flexible for on-site DB/DF/DT combination

Precision class: P4B ultra-precision grade

Material: All-steel precision bearing (steel rings + steel rolling elements), rings treated by TP high-temperature stabilization process

Seal: Open type, no seal

Note: The 15° CD small contact angle reduces rolling resistance and delivers much higher limiting DN speed than 18° CE and 25° ACE variants, suitable for long-term high-speed light & medium load applications, while axial rigidity and overturn resistance are lower than large contact angle series.

TP heat treatment minimizes dimensional creep and metallurgical change under prolonged high temperature to sustain precision. This all-steel bearing has no insulation capacity, not recommended for built-in motor spindles with shaft current risk.

GA premium sorting means each bearing is independently screened on face height and clearance. Users can flexibly configure back-to-back DB, face-to-face DF or tandem DT layout, more flexible than fixed factory pre-matched DBB sets. Open structure eliminates seal drag; continuous oil-air lubrication is mandatory. Long-term high-speed operation with grease is not suggested. No built-in dust shield; labyrinth or air curtain dust-proof device must be equipped.

2 Structure & Operating Characteristics

Japan NMT 7012 CDGATP/P4B is size 7012 ultra-precision all-steel single angular contact ball bearing with 15° contact angle, GA premium sorting and TP high-temperature treatment. Inner/outer rings undergo TP high-temperature stabilizing treatment and ultra-precision mirror grinding; rolling elements are high-carbon chromium bearing steel. Every single bearing is independently sorted to control face height and clearance range for stable batch consistency.

The 15° small contact angle geometry generates less heat under high-speed rotation with superior limiting speed performance. TP heat treatment provides excellent dimensional stability under continuous high temperature. Widely used for belt-driven CNC spindles and engraving milling spindles operating under elevated temperature without shaft current risk.

3 Core Performance Advantages

1. 15° CD small contact angle: Low friction loss, excellent limiting DN speed, ideal for continuous high-speed operation.

2. TP high-temperature stabilizing heat treatment: Resists thermal deformation and dimensional creep, maintains precision during long hot operation.

3. P4B upgraded precision grade: Higher dimensional and rotational accuracy compared to conventional P4A bearings for improved spindle runout performance.

4. All-steel construction: Mature and stable material, cost competitive for belt-driven spindles without shaft current risk.

5. P4A precision + GA single sorting: Strict independent dimension screening for each unit, enabling flexible DB/DF/DT matching on site; open design removes seal friction loss for oil-air lubricated high-speed spindles.

5 Assembly Specifications & Usage Guidelines

5.1 Assembly Environment & Operation Standards

P4B ultra-precision high-temperature bearing should be assembled in constant-temperature dust-free clean environment. Remove all burrs, dust and metal debris on shaft and housing mating surfaces. Use controlled thermal mounting with limited heating temperature; never strike the bearing, shock may cause permanent raceway damage. Assemble bearings from the same production batch preferentially.

5.2 Matching & Preload Instructions

Supplied as independent GA selected single bearings without fixed pairing relation; DB, DF, DT arrangement can be configured on site. Select layout based on spindle speed and load; light preload is recommended for high-speed applications, accurately adjusted via spacers. ⚠️Heavy preload is forbidden under ultra-high speed plus high temperature conditions to prevent thermal seizure.

Selection guide: ①Built-in motor spindle with shaft current →HC hybrid ceramic series; ②Heavy cutting requiring high axial rigidity →7012 ACE series; ③Balanced speed & load →7012 CE series; ④Normal temperature general application →7012 CDGA/P4A; ⑤Ready-to-use factory matched set →7012 CDTP/P4B DBB.

5.3 Lubrication Matching Solutions

No pre-filled lubricant. Oil-air forced circulation lubrication is mandatory for long continuous high-speed & high-temperature operation. Special high-temperature resistant high-speed spindle grease is only allowed for short intermittent low-speed operation. Install high-precision filters on oil circuit and strictly control lubricant cleanliness; do not mix lubricants of different brands. High-temperature resistant spindle oil is recommended for sustained hot working conditions.

5.4 Speed Parameter Note

Limit DN value is obviously higher than 18° CE and 25° ACE bearings of same size. Sufficient safety speed margin must be reserved when high temperature coincides with continuous heavy load; avoid long-term operation near limiting speed.

6 Daily Maintenance & Fault Troubleshooting

Carry out multi-stage low-speed extended running-in after assembly; gradually raise to working speed only after temperature and vibration stay stable. Open bearings have no built-in dust shield; front spindle dust sealing cannot be omitted.

Maintain continuous supply of clean high-temperature resistant lubricant and avoid dry friction without oil. In case of abnormal heating, continuous noise or sharp vibration increase, sequentially check: oil supply, lubricant temperature resistance grade, lubricant cleanliness, excessive preload, assembly coaxiality, dust seal integrity and cutting overload.